Other O Gauge Locomotives

THIS SALE IS FOR A PHOTO-ETCHING INFORMATION PACK PLEASE READ THE WHOLE DESCRIPTION BEFORE PURCHASING. Grainge and Hodder Ltd. For over 30 years Grainge and Hodder Ltd have been providing a Photo-Etching service to the Model Railway trade and the Railway Modeller. From a single G gauge chassis to a run of 5000  N Gauge Nameplates we have produced high quality Etched components for Modellers all over the world. If you have ever sat down and assembled a Brass etched kit, there is a good chance we produced the etched components in it!! For the last couple of years we have attended the Warley Model Railway exhibition at the National Exhibition Centre Birmingham as exhibitors, rather than visitors, and have been suprised at the number of modellers who were not aware of the Photo-Etching process, how it works, and how little it can cost to have components made. Illustrated below are a selection of components we have made for past and current customers. It is not neccesary to be in the Model Trade to use our services, in fact many of our customers produce only for themselves, but it is true to say that designing and making your first Wagon often leads to a thriving business selling them to other modellers!   This auction is for an information pack. Included is a description and explaination of the Photo-etching process, list and sizes of materials, hints and tips on producing camera ready artwork for Photo-etching & even a small brass model car kit designed to illustrate how the process works. For the more experienced designer there are also tips on CAD design for producing plotted photo-etch tooling. This pack is designed for people wishing to design their own kits or models & produce artwork or photo-tooling for professional Photo-etching. It is not a kitchen sink guide to doing acid etching at home.   Please note, for the majority of normal sane people the description is very clear, this is an information pack for people wishing to produce etched kits or models. It is very informative, and gives tips and pointers for producing Artwork or Photo-tooling, however you will not receive a do it yourself etching machine, instructions on setting up an etching business, a real live steam locomotive, a full size Liverpool tram or a full set of production drawings for a Mallard!!!!!! Incredible as it sounds, one buyer recently thought his £1.00 buy it now was getting him an actual Tram plus a live steam loco, another thought he was buying a full set of all the tools, materials and plans to restore a full size Loco!!! We have tried to make the description idiot proof, but sometimes even that isn`t enough! Any Questions please use the "ask seller a question" button before buying.     Special thanks to Agenoria Models for the Photograph of one of their completed Kits.    

THIS SALE IS FOR A PHOTO-ETCHING INFORMATION PACK PLEASE READ THE WHOLE DESCRIPTION BEFORE PURCHASING. Grainge and Hodder Ltd. For over 30 years Grainge and Hodder Ltd have been providing a Photo-Etching service to the Model Railway trade and the Railway Modeller. From a single G gauge chassis to a run of 5000  N Gauge Nameplates we have produced high quality Etched components for Modellers all over the world. If you have ever sat down and assembled a Brass etched kit, there is a good chance we produced the etched components in it!! For the last couple of years we have attended the Warley Model Railway exhibition at the National Exhibition Centre Birmingham as exhibitors, rather than visitors, and have been suprised at the number of modellers who were not aware of the Photo-Etching process, how it works, and how little it can cost to have components made. Illustrated below are a selection of components we have made for past and current customers. It is not neccesary to be in the Model Trade to use our services, in fact many of our customers produce only for themselves, but it is true to say that designing and making your first Wagon often leads to a thriving business selling them to other modellers!   This auction is for an information pack. Included is a description and explaination of the Photo-Etching process, list and sizes of materials, hints and tips on producing camera ready artwork for Photo-etching & even a small simple brass model car designed to illustrate how the process works. For the more experienced designer there are also tips on CAD design for producing plotted photo-etch tooling.   This pack is designed for people wishing to design their own kits or models & produce artwork or photo-tooling for professional Photo-etching. It is not a kitchen sink guide to doing acid etching at home.   Please note, for the majority of normal sane people the description is very clear, this is an information pack for people wishing to produce etched kits or models. It is very informative, and gives tips and pointers for producing Artwork or Photo-tooling, however you will not receive a do it yourself etching machine, instructions on setting up an etching business, a real live steam locomotive, a full size Liverpool tram or a full set of production drawings for a Mallard!!!!!! Incredible as it sounds, one buyer recently thought his £1.00 buy it now was getting him an actual Tram plus a live steam loco, another thought he was buying a full set of all the tools, materials and plans to restore a full size Loco!!! We have tried to make the description idiot proof, but sometimes even that isn`t enough! Any Questions please use the "ask seller a question" button before buying.     Special thanks to Agenoria Models for the Photograph of one of their completed Kits.    

THIS SALE IS FOR A PHOTO-ETCHING INFORMATION PACK PLEASE READ THE WHOLE DESCRIPTION BEFORE PURCHASING. Grainge and Hodder Ltd. For over 30 years Grainge and Hodder Ltd have been providing a Photo-Etching service to the Model Railway trade and the Railway Modeller. From a single G gauge chassis to a run of 5000  N Gauge Nameplates we have produced high quality Etched components for Modellers all over the world. If you have ever sat down and assembled a Brass etched kit, there is a good chance we produced the etched components in it!! For the last couple of years we have attended the Warley Model Railway exhibition at the National Exhibition Centre Birmingham as exhibitors, rather than visitors, and have been suprised at the number of modellers who were not aware of the Photo-Etching process, how it works, and how little it can cost to have components made. Illustrated below are a selection of components we have made for past and current customers. It is not neccesary to be in the Model Trade to use our services, in fact many of our customers produce only for themselves, but it is true to say that designing and making your first Wagon often leads to a thriving business selling them to other modellers!   This auction is for an information pack. Included is a description and explaination of the Photo-etching process, list and sizes of materials, hints and tips on producing camera ready artwork for Photo-etching & even a small brass model car kit designed to illustrate how the process works. For the more experienced designer there are also tips on CAD design for producing plotted photo-etch tooling. This pack is designed for people wishing to design their own kits or models & produce artwork or photo-tooling for professional Photo-etching. It is not a kitchen sink guide to doing acid etching at home.   Please note, for the majority of normal sane people the description is very clear, this is an information pack for people wishing to produce etched kits or models. It is very informative, and gives tips and pointers for producing Artwork or Photo-tooling, however you will not receive a do it yourself etching machine, instructions on setting up an etching business, a real live steam locomotive, a full size Liverpool tram or a full set of production drawings for a Mallard!!!!!! Incredible as it sounds, one buyer recently thought his £1.00 buy it now was getting him an actual Tram plus a live steam loco, another thought he was buying a full set of all the tools, materials and plans to restore a full size Loco!!! We have tried to make the description idiot proof, but sometimes even that isn`t enough! Any Questions please use the "ask seller a question" button before buying.     Special thanks to Agenoria Models for the Photograph of one of their completed Kits.    

THIS SALE IS FOR A PHOTO-ETCHING INFORMATION PACK PLEASE READ THE WHOLE DESCRIPTION BEFORE PURCHASING. Grainge and Hodder Ltd. For over 30 years Grainge and Hodder Ltd have been providing a Photo-Etching service to the Model Railway trade and the Railway Modeller. From a single G gauge chassis to a run of 5000  N Gauge Nameplates we have produced high quality Etched components for Modellers all over the world. If you have ever sat down and assembled a Brass etched kit, there is a good chance we produced the etched components in it!! For the last couple of years we have attended the Warley Model Railway exhibition at the National Exhibition Centre Birmingham as exhibitors, rather than visitors, and have been suprised at the number of modellers who were not aware of the Photo-Etching process, how it works, and how little it can cost to have components made. Illustrated below are a selection of components we have made for past and current customers. It is not neccesary to be in the Model Trade to use our services, in fact many of our customers produce only for themselves, but it is true to say that designing and making your first Wagon often leads to a thriving business selling them to other modellers!   This auction is for an information pack. Included is a description and explaination of the Photo-Etching process, list and sizes of materials, hints and tips on producing camera ready artwork for Photo-etching & even a small simple brass model car designed to illustrate how the process works. For the more experienced designer there are also tips on CAD design for producing plotted photo-etch tooling.   This pack is designed for people wishing to design their own kits or models & produce artwork or photo-tooling for professional Photo-etching. It is not a kitchen sink guide to doing acid etching at home.   Please note, for the majority of normal sane people the description is very clear, this is an information pack for people wishing to produce etched kits or models. It is very informative, and gives tips and pointers for producing Artwork or Photo-tooling, however you will not receive a do it yourself etching machine, instructions on setting up an etching business, a real live steam locomotive, a full size Liverpool tram or a full set of production drawings for a Mallard!!!!!! Incredible as it sounds, one buyer recently thought his £1.00 buy it now was getting him an actual Tram plus a live steam loco, another thought he was buying a full set of all the tools, materials and plans to restore a full size Loco!!! We have tried to make the description idiot proof, but sometimes even that isn`t enough! Any Questions please use the "ask seller a question" button before buying.     Special thanks to Agenoria Models for the Photograph of one of their completed Kits.    

THIS SALE IS FOR A PHOTO-ETCHING INFORMATION PACK PLEASE READ THE WHOLE DESCRIPTION BEFORE PURCHASING. Grainge and Hodder Ltd. For over 30 years Grainge and Hodder Ltd have been providing a Photo-Etching service to the Model Railway trade and the Railway Modeller. From a single G gauge chassis to a run of 5000  N Gauge Nameplates we have produced high quality Etched components for Modellers all over the world. If you have ever sat down and assembled a Brass etched kit, there is a good chance we produced the etched components in it!! For the last couple of years we have attended the Warley Model Railway exhibition at the National Exhibition Centre Birmingham as exhibitors, rather than visitors, and have been suprised at the number of modellers who were not aware of the Photo-Etching process, how it works, and how little it can cost to have components made. Illustrated below are a selection of components we have made for past and current customers. It is not neccesary to be in the Model Trade to use our services, in fact many of our customers produce only for themselves, but it is true to say that designing and making your first Wagon often leads to a thriving business selling them to other modellers!   This auction is for an information pack. Included is a description and explaination of the Photo-etching process, list and sizes of materials, hints and tips on producing camera ready artwork for Photo-etching & even a small brass model car kit designed to illustrate how the process works. For the more experienced designer there are also tips on CAD design for producing plotted photo-etch tooling. This pack is designed for people wishing to design their own kits or models & produce artwork or photo-tooling for professional Photo-etching. It is not a kitchen sink guide to doing acid etching at home.   Please note, for the majority of normal sane people the description is very clear, this is an information pack for people wishing to produce etched kits or models. It is very informative, and gives tips and pointers for producing Artwork or Photo-tooling, however you will not receive a do it yourself etching machine, instructions on setting up an etching business, a real live steam locomotive, a full size Liverpool tram or a full set of production drawings for a Mallard!!!!!! Incredible as it sounds, one buyer recently thought his £1.00 buy it now was getting him an actual Tram plus a live steam loco, another thought he was buying a full set of all the tools, materials and plans to restore a full size Loco!!! We have tried to make the description idiot proof, but sometimes even that isn`t enough! Any Questions please use the "ask seller a question" button before buying.     Special thanks to Agenoria Models for the Photograph of one of their completed Kits.    

    O Gauge Kit North Shore Line Interurban Loco 455/456 <p> An “Elroâ€� O Gauge CARD Model Kit by Elena & Robert Hendry which builds up into the Alco/GE battery/trolley locomotives of the celebrated Chicago, North Shore & Milwaukee Electric Railroad, America’s fastest interurban electric railroad. To complete the kit, which comes as a static model, but can be motorised using commercially available components, you will need scissors/craft knife, a steel ruler, glue, scrap card, wire, handrail knobs, glazing material, and felt tip pens or paint to touch in exposed edges of the card. A Card bell, knuckle couplers and trucks are included in the kit, but for a better model, these parts should be replaced with commercially available components. <p> The American interurban has always been popular with modellers, but as a minority interest, kits or imported etched brass equipment, have always been understandably expensive because of the low production runs that manufacturers can expect. The high cost and complexity of such models, superb though they are, is daunting to many modellers wishing to enter the traction field. In September 2007, we launched our first kit for the Manx Electric Railway, which was a British interurban. At that time there were just two kits in OO scale (both for the same vehicle) and nothing in O scale, as the MER had attracted hardly any trade support in over a century. Within four months, we had kits for no fewer than TEN MER vehicles in our range, and have customers who had bought every kit as it came out, and were demanding more. Because the “Roâ€�, or Robert part of ELRO, had always admired the celebrated North Shore Line, we decided it would be great to have a North Shore loco in our collection, so we studied drawings and photos of the two Alco/GE locos that entered service on the North Shore line in 1928. With their on-board storage batteries, they could operate away from the wires, so industrial private sidings did not need a complex and potentially hazardous overhead wire. The two engines ran until the end of North Shore Line services in 1963, and unlike the traditional large US freight locomotive which looks ridiculous on short trains, were quite at home on consists of two or three freight cars and a caboose. They could operate round incredibly sharp curves, and are the ideal prototype for the modeller who is strapped for space. As battery trolley locos, the modeller can prototypically string overhead on the “main lineâ€� but does not need to worry about complex overhead with masses of frogs in the sidings that make de-wirements common. <p> As work progressed on the kit, we realised that the engines had changed over the years, exchanging their original black paint for green in later years, acquiring a second trolley pole, a raised trolley plank, access rungs by the side of the cab door, and other detail alterations.  We considered developing a kit for either engine in all forms, but decided there would be so much scrap material left over for the buyer, that it was better to produce TWO separate kits. One kit would build up into for 455 in the original BLACK livery. The second kit would be for 456 in green with all later additions. The black 455 kit, although intended for an engine in 1928 style, could be adapted to cover any intermediate stage in 455’s history until she went into green colors. <p> In this age of plastic and resin, the use of colored card in a kit may seem “old-fashionedâ€�, but card is a very versatile and convenient modelling medium, and where small production runs are called for, is ideal, as it offers versatility at low cost. To do a kit like this in plastic would put up the cost 20 fold or more because the massive tooling costs have to be recouped on a short production run. The kit consists of several sheets of pre-printed fully coloured card, along with detailed instructions and a photo of a completed model to refer to during construction. It includes the body sides, ends, and floors. It can be built up as a simple “boxâ€� by a younger or less experienced modeller, or the multiple layers, including overlays for the strapping and hinges permits superb 3D effects. The card is quite thin, but this means that it bends smoothly but flooring and other structural areas should be reinforced with additional card that is readily available from stationers, or you can use a cornflake or similar packet if you are into recycling !  In assembling the bodies, a multi-layer sandwich is assembled adding strength, whilst separate add on details are included, although the beginner can omit these if he prefers as they are printed on the sides as well. Painting is often the biggest worry for modellers, and many fine models are let down by a mediocre paint job. Apart from being much easier to build that a brass or white metal kit, another benefit of our pre-printed card kits is that this daunting task is avoided as the model is pre-colored with full lettering, striping etc. In fact, the reason we did our very first “kitâ€� was that we wanted a British tram with incredibly complex striping, and baulked at trying a paint job like that. With computer aided design, we could blow it up to 800% of final size and get it exactly right and then get it printed. The kit includes fold-up card bogies that are suitable for a static model. The card sideframes can be added as overlays to a commercial power bogie for a working model, but the correct Alco RM63B trucks are available from commercial model traction suppliers as well. <p> Unlike expensive etched brass kits that many modellers find too daunting, and are not really suitable to the younger modeller, if you do get it wrong, it is not a matter of hundreds of dollars that have been thrown away. If you do make a mess of it, you can put it down to experience and start again. For the freelancer, it is a useful tool. Forget about the North Shore Line, paint out the NSL logo and build the model up as a battery electric for a switching layout or an industrial yard. The choice is up to you.   <p> The display model is from one of our kits. Having had the “pleasureâ€� of building other manufacturer’s kits that do NOT go together, we always make a “proving modelâ€� to make sure all is well. As well as being fair to buyers of our kits, we make kits of  stock we want for our own layout, so we want one anyway ! For that reason, we have added a full set of handrails, a cast bell, and working trolley poles to our model. They do not come with the kit, but show clearly that with a few inexpensive additions, the basic model can be an attractive addition to any layout. At the time our Publicity photo of the proving model of 456 was taken, we had not acquired working Alco trucks, so she sits on the original card trucks, but even these have been improved for the production kits. <p> If there is a sufficient uptake from traction modellers for our North Shore loco, we will be happy to consider other US interurban equipment at a later date, if it is suitable for card construction.   <p> WHEN ORDERING YOUR KIT, PLEASE SAY WHETHER YOU WANT <p> 455 IN ORIGINAL BLACK COLORS  or <p> 456 IN 1950s GREEN COLORS        <p> If you want both versions, contact us to arrange this.      

NOW IN STOCK TOP QUALITY STOCK BOXES SOLD IN SETS OF FOUR BOXES FOR £25.00 FOR O GAUGE LOCOS AND COACHES LONG ENOUGH FOR A 4.6.2 LOCO AND TENDER OR WAGONS COACHES YOU GET FOUR BOXS  FOR £25.00 *******POST FREE******* YOU CAN ORDER AS MANY SET OF FOUR AS YOU LIKE  SEE FEED BACK ON THESE BOXS *******

Nice Tri-ang Big Big 0-6-0 Tank Engine, needs a clean, not tested.. TERMS OF SALE:  PLEASE READ BEFORE BIDDING, THANK  YOU. 1. POSTAGE:  Postage is usually guessed at time of listing  and based on 1st Class post UK. If I'm sending overseas I will obtain cost from the Post Office and send an invoice. I'm not responsible for any losses or damage in the post and by bidding you are agreeing not to make any claims for uninsured items. I obtain proof of postage and will assist with any claim from the Post Office. If you want recorded or insured please ask. If you require prompt postage please advise as I generally post 2-3 times per week. Please note you are buying on my terms not paypal’s. If you do not like my postage charges please do not bid. 2. PACKAGING: There is a fee of 50p-£1 per listing only. I buy in bubblewrap and boxes although will used second hand packaging when suitable . 3. PAYMENTS:  I  prefer cheque payment in the UK due to paypal costs. I do accept paypal but if in the UK mainly for those without a cheque account. Overseas  I accept Paypal but only if I'm covered (eg: you have a confirmed postal address and/or are verified).Please note terms of sale are my terms not paypal, I am the person selling the goods ,if you do not like this  please do not bid. Postal Orders payable to Bob Leggett are also acceptable. Please make  payment promptly, if not received within 7 days the item will be relisted! Please add a note describing item purchased when paying by cheque made payable to R.LEGGETT   5. THANKYOU:  It is my intention that buyers received the service I would expect to receive as a buyer and I hope every transaction is hassle free. Thanks for your custom    

t8260652cunni store chad valley u bilda 4-4-2 loco built & in original box Very rare and old chad Valley u-bilda 4-4-2 model train in tin plate in original box in great condition Certain images/photos are the copyrighted property of JupiterImages and are used with permission under license.

HERE WE HAVE FOR SALE A PRE WAR "O GAUGE"  BASSETT LOWKE CLOCKWORK MECHANISM SUITABLE FOR  THE "PRINCESS ELIZABETH 4 WHEEL LOCOMOTIVES"-THIS MECHANISM IS IN WORKING ORDER AND COMES WITH THE THREE CONTROL RODS-SORRY NO  KNOBS THOUGH. PLEASE NOTE THAT THIS MECHANISM REQUIRES A "MALE" KEY ( I THINK THERE IS ONE ON EBAY AT THE MOMENT-KEY THAT IS) UNLIKE THE SIMILAR BING FOR BASSETT LOWKE MECHANISMS WHICH USE A "FEMALE" KEY. THE ORIGINAL WHEELS HAVE BEEN REPLACED BY FOUR SOLID BRASS REPLACEMENTS.THIS ITEM IS BEING SOLD AS SEEN SO IF YOU HAVE ANY DOUBTS OR CONCERNS PLEASE ASK QUESTIONS BEFORE BUYING-ALSO NOTE POSTAL COSTS ARE NOT NEGOTIABLE - IF YOU ARE NOT IN AGREEMENT WITH THEM PLEASE DO NOT BUY.   I ACCEPT PAYPAL, PERSONAL CHEQUES, POSTAL ORDERS AND BANKERS DRAFTS-BUYERS OUTSIDE UK. TO PAY THROUGH PAYPAL-NO EXCEPTIONS UNLESS PRIOR ARRANGEMENTS HAVE BEEN AGREED.    OVERSEAS BUYERS PLEASE NOTE THAT I CAN NOT BE HELD RESPONSIBLE FOR ANY CUSTOMS DUTY OR OTHER CHARGES THAT MAY BE LEVIED UPON THIS ITEM. SINCE THIS IS NOT AN AUCTION THERE IS ABSOLUTELY NO MERIT IN LEAVING AN OFFER UNTIL THE LAST MOMENT AND A DEMINIMUS AMOUNT HAS BEEN SET WHEREBY AN OFFER WILL BE AUTOMATICALLY ACCEPTED-SO IF YOU WANT YOU WELL MAY LOSE IT . I CAN BUT SAY NO TO YOUR OFFER AND YOU MIGHT BE PLEASANTLY SURPRISED. THANKS FOR LOOKING AND GOOD LUCK.                                                                 Powered by eBay Turbo Lister Powered by eBay Turbo Lister

BRAND NEW BASSETT LOWKE SR/BR 2.6.0 LOCO AND TENDER ELECTRIC TWO OR THREE RAIL OPERATION THIS MODEL IS NO LONGER AVAIABLE AND SOLD OUT A FEW YEARS AGO OFFERED AT A BARGAIN PRICE SEE PHOTO

flair-rail Store HELJAN 3583 0 GAUGE 35 HYMEK BR GREEN PANELS D7087 NEW WE ARE PLEASED TO OFFER THIS HELJAN 3583 CLASS 35 HYMEK BR GREEN WITH YELLOW PANELS D7087 0 GAUGE BRAND NEW IN BOX DERIECTIONAL LIGHTING TWIN MOTOR OPERATING FAN PLEASE VISIT OUR SHOP FOR MANY OTETHR ITEMS DELIVERY BY COURIER TO UK MAINLAN ONLY FLAIR-RAIL Condition:    New   Makes a great gift for Collectors andale andalesell Click Images to Enlarge Payment Options:   Credit Cards , Postal Order/Bankers Draft ,PayPal ,Personal Cheque Shipping Options:   Shipping Carrier Domestic International 1st Class Standard £12.00 - I will ship to:   United Kingdom and Internationally Customer Service Policy:   We always hope that you will be pleased with your purchase from us here at Flair Rail. However, if you have any questions or queries please feel free to contact us and we will aim to do our best in dealing with any situation! Thank You. Payment Policy:   Postal Order/Bankers Draft: All cheques and postal orders in sterling only. FLAIR-RAIL Welcome to FLAIR-RAIL. We are a family run business based in 2 warehouses open to the public in Burnham-On-Crouch with permanant displays and plenty of stock for our ever returning customers to browse! We strive to provide an efficient and friendly service to all our customers! Please feel free to browse and Thank You for taking the time to look at our store! FLAIR-RAIL appreciates your business. Winning Bidder: Click button on right to checkout now. andale andalecheckout         Use the FREE Counters 1 million sellers do - Vendio!   Auction Tools >> Save Time. Multiple Sales. Starting @ £1.50/mo. Try now!

BRAND NEW BASSETT LOWKE SR/BR 2.6.0 LOCO AND TENDER ELECTRIC TWO OR THREE RAIL OPERATION THIS MODEL IS NO LONGER AVAIABLE AND SOLD OUT A FEW YEARS AGO OFFERED AT A BARGAIN PRICE SEE PHOTO

SPRINGSIDE 14XX 0.4.2 TANK FINISHED IN GWR GREEN AS NO 1420 THIS IS A NEW BUILD NOT A SECOND HAND LOCO READY TO RUN SLATERS WHEELS CAN MOTOR TESTED AND RUNS FINE OFFERED AT A VERY GOOD PRICE SEE PHOTO

BACHMANN BRASS 121 RAILCAR BR GREEN WESTER REGION WITH FULL INTERIOR AND GLAZING  BR GREEN WITH SPEED WISKERS THIS IS ONE OF THE BEST I HAVE SEEN RUNS FINE OFFERED AT A VERY GOOD PRICE SEE PHOTO

FOR SALE INTERESTING O GAUGE LOCOMOTIVE BODY-I IMAGINE PROBABLY PRE WAR SINCE THE PAINTWORK IS CRAZED- THERE SEEMS TO BE BRASS IN ITS MANUFACTURE AND IS POSSIBLY EITHER KIT OR SCRATCH BUILT-IT SEEMS TO HAVE A CONTINENTAL LOOK ABOUT IT-POSSIBLY BING, CARRETTE OR EVAN MARKLIN, BUT THE COUPLING AT THE FRONT DOES NOT SEEM LIKE MARKLIN-QUITE HNESTLY THIS ONE HAS ME STUMPED, INTRIQUING THOUGH-I SHALL LET THE PICTURES DO THE REST OF THE TALKING ON THIS ONE.   THIS ITEM IS BEING SOLD AS SEEN SO PLEASE ASK QUESTIONS BEFORE BUYING, PLEASE NOTE THAT THE PICTURES FORM PART OF THE DESCRIPTION SO PLEASE EXAMINE  THEM CAREFULLY. I CAN NOT BE RESPONSIBLE FOR NON DELIVERY OF THE ITEM BY ROYAL MAIL OR ANY OTHER CARRIER, I ALWAYS OBTAIN PROOF OF POSTING AND WILL OF COURSE ASSIST IN THE EVENT OF NON DELIVERY-IF YOU WISH THE ITEM TO BE INSURED PLEASE ASK, BUT IT WILL BE MORE COSTLY. ALSO POSTAL AND PACKING CHARGES ARE NOT NEGOTIABLE.  A DISCOUNT ON POST AND PACKING COSTS WILL BE MADE IF ANY OTHER ITEMS ARE PURCHASED AND CAN BE WRAPPED IN THE SAME PACKAGE. I PREFER PAYPAL, BUT WILL ACCEPT CHEQUES (PLEASE ALLOW AT LEAST SEVEN DAYS FOR CLEARANCE), POSTAL ORDERS AND BANKERS DRAFTS. IF BUYING OUTSIDE OF UNITED KINGDOM, PLEASE PAY BY PAYPAL-NO EXCEPTIONS UNLESS PRIOR AGREEMENT HAS BEEN OBTAINED   THANKS FOR LOOKING AND GOOD LUCK Powered by eBay Turbo Lister Powered by eBay Turbo Lister

BRITISH RAILWAYS A3 CLASS 4-6-2 LOCOMOTIVE and TENDER, No.60103'FLYING SCOTSMAN'This is a fantastic 'O' guage reproduction of the famous 'Flying Scotsman' Locomotive as preserved at the National Railway Museum.The model is number 189 of only 300 produced worldwide.It has been removed from it box twice, once to admire it's beauty and the other to photograph it for this sale.It has the following specification:-Revised gearbox - less noise.Individually numbered brass plaque.Precision engineered and individually tested.12-14 volt DC motor with custom made revised gear.Suitable for two and three rail operation using a switch located in the cab.Isolating on/off switch located in the cab.Realistic detail, included sprung buffers and lamp irons complete with lamps.Full operating and maintenance instructions supplied.Revised active smoke generator for added authenticity.Illuminated fire box.There is a bit of excess glue on the tender, which can easily be removed with a steady hand!Please feel free to message me with any questions.Thanks for looking!! 

Radio Controlled L.N.E.R. G5 0-4-4 Tank Engine The locomotive is built from an etched brass kit and painted in a lightly weathered lined black livery. The motor is a Maxon 6V coreless unit driving through an ABC Gears gearbox. The radio is a Futaba AM system operating on a frequency of 26.995 MHz. Control is provided by an Antenna Models LC301 electronic speed controller. A 7.2V battery pack is fitted in the locomotive to power the motor and the radio receiver. A recharging socket for this battery pack and an on/off switch are also fitted in the locomotive. The radio receiver aerial is fitted in the insulated cab roof. The locomotive runs on Slaters' finescale wheels. These wheels are insulated so the engine can be run at the same time as conventional, or DCC fitted, locomotives on powered track without interference. Rechargeable batteries for the radio transmitter are included as is a mains powered Mtroniks EP multicharger, with the appropriate leads and jack plugs, which will simultaneously recharge the locomotive and transmitter. A foam lined storage box for the engine is included as well as a set of instructions to cover operation and recharging. 

7MM SCALE KIT BUILT SUPER MODEL,BUILT AND WEATHERED TO A VERY HIGH STANDARD. PAY BY CHEQUE AND GET POST FREE SEE  MY OTHER ITEMS FOR MORE O GAUGE LOCO,S ANY QUESTIONS PLEASE ASK

Kit built BR (Ex LNWR/LMS) Super D 0-8-0, built to a good standard. Slaters wheels, unknown motor. Superb slow runner. Now surplus to requirements. The model will be well packaged for posting.